Manual Release Instructions

GET IN TOUCH

With over 28 years experience, AAC are well qualified to offer a high quality, specialist service in the repair and maintenance of automatic gate and barrier systems, in London and the South East.

FAAC Swing Gates

FAAC 400 Key

FAAC 400 RAM Pre 2006

Slide plastic cover back to reveal key barrel. Insert key and turn at least one full turn anti clockwise to release. The key may go stiff after one quarter turn but it needs to be pushed past this point to release the operator.

FAAC 400 RAM post 2006

Turn key one quarter turn to allow access to release knob below.

Turn the red knob anti clockwise one full turn to release the operator

FAAC 402

Manual Release Instructions for FAAC 402 drive system coming soon.

FAAC 402 Key

FAAC 402 RAM

Insert triangular key into underside of operator and turn fully one turn anti clockwise to release.

FAAC 412 Key

FAAC 412 RAM

Once the key is inserted, one quarter turn is required to release the mechanical lock.

FAAC 422 Key

FAAC 422 RAM pre 2006

Slide plastic cover back to reveal key barrel. Insert key and turn at least one full turn anti clockwise to release. The key may go stiff after one quarter turn but it needs to be pushed past this point to release the operator.

FAAC 400 post 2006

Turn key one quarter turn to allow plastic cover to be lifted and allow access to release knob below.

Turn red knob one full turn anti clockwise one full turn to release the operator

Came Swing Gates

Came Frog

Came Frog Release Handle

Came Triangular Release Key

Came Release Keys

Came Frog Release Instructions

Came Amico

Came Triangular Release Key

Came Amico Release Instructions

Came Fernie

Came Release Keys

Came Fernie Release Instructions

Came Fast

Came Triangular Release Key

Came Fast Release Instructions

Came ATI

Came Triangular Release Key

Came ATI Release Instructions

Came Frog – J

Came Triangular Release Key

Came Frog – J Release Instructions

FAAC Sliding Gates

FAAC 746 and 844

FAAC Viro release key

Open plastic key cover and insert viro key into lock. Turn one quarter turn.

Pull the key and then the arm out to 45 degrees from the operator. This will release the mechanism and allow the gate to be pushed open or closed.

FAAC C720

FAAC Triangular Release Key.

Insert triangular key into lock on rear of operator and turn one quarter turn.

Pull the release section on the back of the operator towards the ground.

When the release is parallel to the ground the operator will be in manual and the gate can be pushed open and closed.

FAAC 820 and 860

FAAC Viro Release key

FAAC 820/860 Release Handle

With the manual release shown above you will need to use a Viro key inserted into the key lock. The whole cap must then be turned to release the operator.

Remove the plastic cap covering the manual release. Insert the triangular part of the manual release handle and turn anti clockwise to release.

Sliding Gates

Manual Release Instructions Coming Soon.

Please contact us for support

Came Sliding Gates

Came BX or BK range

Came Triangular Release Key.

Barriers

Manual Release Instructions Coming Soon.

Please contact us for support

Bi-Folding Gates

Manual Release Instructions Coming Soon.

Please contact us for support

Garage Doors

Manual Release Instructions Coming Soon.

Please contact us for support

Control Cabinets

Manual Release Instructions Coming Soon.

Please contact us for support